When it fits
Use Part 107 for most civil work flights under 55 lb, including unpaid work for a project or organization. For personal enjoyment, check recreational rules. At 55 lb or more, check the heavier aircraft pathways. Part 107 applicability and definitions · FAA guidance on flight purpose
What to check
| Before you fly | What the rule means | What to do |
|---|---|---|
| Pilot | The remote pilot in command generally needs a remote pilot certificate with a small UAS rating and a qualifying knowledge test or training within the previous 24 calendar months. | Confirm who is in command and check their test or training date. § 107.12 · § 107.65 |
| Aircraft | The takeoff weight includes batteries, payload, and anything attached. Registration and applicable Remote ID rules also apply. | Weigh the loaded aircraft and verify registration, markings, and Remote ID. § 107.3 · § 107.13 · FAA Remote ID |
| Visual line of sight | Build the flight around the crew’s ability to see the aircraft throughout the operation. | Pick a position where the crew can see the flight area, including the far side of structures. § 107.31 |
| Airspace and altitude | Class B, C, D, and airport-designated surface Class E require prior FAA authorization. The general altitude limit is 400 feet above ground, with a structure allowance in § 107.51(b). | Check the exact site, permitted height, and any flight restrictions before takeoff. § 107.41 · § 107.51 |
| Preflight | The remote pilot in command assesses the operating area and briefs the crew. The aircraft’s control links and available power must support the flight. | Check weather, hazards, and people on the ground. Verify control links and sufficient power. § 107.49 |
| Night, people, or moving vehicles | Each has its own conditions. For flights over people, the aircraft’s eligibility category can matter. | Check which conditions apply to that flight before treating it as routine. § 107.29 · FAA operations over people guidance |
Walk through a roof inspection
- Identify the flight. A contractor asks you to inspect a roof with a 4-pound drone. Start with Part 107 and identify the remote pilot in command.
- Check the site. Look up the airspace and any restrictions. Plan for workers or passersby below and get controlled-airspace authorization if required.
- Plan what the crew can see. If the building would block your view during part of the inspection, plan separate passes from places that keep the aircraft visible. A plan that still needs to go beyond sight may need a waiver.
Why visual line of sight matters
Direct sight helps the crew know where the aircraft is, scan for traffic and hazards, and avoid endangering people and property. The rule generally requires the remote pilot in command, the person at the controls, and a visual observer if used to have the ability to see the drone unaided except for corrective lenses. The remote pilot and person at the controls, or the observer, must exercise that ability during the flight. § 107.31 · FAA final-rule explanation
When a waiver matters
A Part 107 waiver covers a specific departure from a rule listed in § 107.205, such as visual line of sight for an eligible inspection. The FAA evaluates whether the operation can be conducted safely under the waiver’s conditions. Assess controlled-airspace authorization separately. § 107.200 · FAA waiver guidance
For carriage of someone else’s property for compensation or hire, § 107.205(c) bars a visual line of sight waiver. See the Part 135 delivery guide for that type of BVLOS operation. § 107.205(c)
Common questions
Can a video feed satisfy visual line of sight? A feed can help with the inspection. The crew still has to meet the rule’s direct visual capability. § 107.31
What do I need to fly at night? Part 107 allows night flight when the pilot meets the knowledge or training condition and the aircraft carries flashing anti-collision lighting visible for at least three statute miles. Check airspace and other restrictions separately. § 107.29(a)
Reviewed